Sending Domains
You can send from a domain you own or from a Nitrosend address such as
hello@your-brand.nitrosend.net. Your own domain is the better choice for
reaching the inbox. A Nitrosend address needs no DNS setup and does not use your
custom-domain allowance, so you can start now and connect your domain later.
What to know before you choose
- Reputation: a Nitrosend address has to warm up its sending reputation over time, so start with your most engaged contacts and build up. That reputation stays with the address and does not move to your own domain when you switch.
- Capacity: a Nitrosend address shares sending capacity with other senders, so big lists go out more slowly than from your own domain.
- DNS: your own domain needs DNS records, which can take from a few minutes to a couple of days to take effect. You can leave while they do. We keep checking and email you when the domain is ready to send from.
- The Nitrosend footer: on the Free plan your emails carry the footer from a Nitrosend address and from your own domain alike. How to remove it.
Use your Nitrosend address
Choose an address during setup and activate it. If you complete your Brand Kit first, Nitrosend can suggest a name from your company name. Activating an address does not send any email. An existing custom sender stays selected until you choose to replace it.
Under Settings → Domains, your Nitrosend address is listed with your domains. Open it and select Use this address to make it your default.
The shared nitrosend.net sender is paced, so larger sends go out gradually.
Small bursts are allowed, and individual flow and transactional messages go
ahead of campaigns. Queued mail continues automatically, and this pacing is
separate from your plan's rolling 24-hour allowance.
For sustained campaign volume, connect your own sending subdomain. It does not use the shared-domain rate pool; your plan allowance and other provider and safety limits still apply. Upgrading alone does not remove shared-domain pacing.
Change your Nitrosend address
In Settings → Domains, open your Nitrosend address and select Change
address, then Change address name. You can also make this change from Inbox → Manage inboxes.
For example, hello@old-name.nitrosend.net can become
hello@new-name.nitrosend.net.
The same inbox keeps its messages and attachments. Previous addresses keep receiving mail, and new replies use the new address. Past emails stay unchanged. Old names remain reserved to your brand, so another customer cannot claim them. System names and names that impersonate other businesses are unavailable.
Address changes share your existing address allowance. If you change the name too often, you'll be asked to wait an hour. A campaign, flow or reply still using the address must finish or be updated before you change it. The new sender goes through the usual sending checks.
For API clients, send subdomain and the current brand_subdomain.fqdn as
expected_fqdn to POST /v1/my/brands/{sid}/rename_hosted_sender. An exact retry
returns the same address. The response is the updated brand. The agent tool uses
nitro_manage_domains with operation: "rename_brand_subdomain", the same two
parameters, and confirm: true.
Add a sending subdomain
- Go to Settings → Domains (app.nitrosend.com/my/settings/domains).
- Choose your own domain and enter it. Nitrosend sets up
send.yourdomain.comso your emails come fromhello@yourdomain.com. Select Change domain to use a different one. If you already have a domain, choose Add another domain and enter the subdomain. - If your DNS provider supports one-click setup, select Connect and authorise it. Otherwise, Nitrosend shows the DNS records for that subdomain to add at your DNS provider (see below).
- Nitrosend verifies the records automatically. Once they resolve, the domain flips to Verified and we email the account owner, the first time it verifies.
Verifying alone does not change your From address. Open the domain and select Send from, or set your From address under Brand → Sender. If you chose the domain for your first send, Nitrosend moves it for you.
Use a dedicated sending subdomain
A subdomain such as send.yourdomain.com helps separate sending configuration
from your team's everyday mail. Add the records Nitrosend supplies without
replacing the MX records used by your existing inbox provider.
The technical sending domain and the address recipients see can differ. Use the verified From address offered by Nitrosend; a technical sending subdomain does not mean your visible address must also use it.
Subdomains help separate mail streams, but inbox providers can consider the parent domain, related domains, shared IPs and links together. They do not guarantee independent reputation or Inbox placement. See Sending to Outlook and Microsoft 365.
Add the DNS records
The Domains screen lists the exact records for your subdomain: typically a verification record, SPF, DKIM, and a return-path / tracking record. Add each one at your DNS provider (Cloudflare, GoDaddy, Namecheap, Route 53, and so on).
Enter each record's Host in your provider's Host or Name field, with the type
and value as shown. Most providers add your domain to that field themselves, so
send becomes send.yourdomain.com, and @ means the domain itself. Some
providers, such as Cloudflare, accept the full name too.
DNS changes can take anywhere from a few minutes to a couple of days to propagate. Nitrosend re-checks automatically, so you don't need to trigger verification or stay on the page.
Share a subdomain with another brand or client
The account owner or an administrator can share an exact subdomain of a verified
domain. For example, the owner of alvin.finance can give one brand
envoy.alvin.finance and another travel.alvin.finance.
- Open Settings → Domains in the brand that owns the verified domain.
- Select Share a subdomain, enter a name such as
envoy, and choose the destination brand or eligible managed client. - Select Share subdomain, then Open domain setup to finish the usual DNS setup in that brand. Only the new subdomain's records need to change.
- Open Inbox → Manage inboxes. If receiving is not configured yet, choose New inbox → Set up another domain, select the verified shared subdomain, and finish receiving setup. Add its MX record only on that subdomain.
- Add further named inboxes on the same subdomain from New inbox.
The new brand has its own sending identity and inboxes. Sharing does not switch
an existing sender, expose another brand's messages, or reuse its sending history.
The sending domain (send.envoy.alvin.finance) and visible From domain
(envoy.alvin.finance) use one custom-domain slot in the destination account.
Inboxes use that account's existing inbox allowance and paid capacity.
Managed clients still use the existing ownership claim and client-paid subscription. Sharing a domain does not bypass those requirements.
To withdraw permission, open the same section and choose Stop sharing. Subsequent sends, including queued mail, and receiving stop for that subdomain. Existing messages stay in their original brand; other subdomains keep working. Share again restores permission after the owner confirms the same destination. If a managed relationship ends, a new relationship needs fresh sharing permission.
For API clients, the owner brand uses:
GET /v1/my/domains/{domain_id}/subdomainsto list shared children (25 per page).POST /v1/my/domains/{domain_id}/subdomainswith{ "subdomain": { "subdomain": "envoy", "brand_sid": "destination-brand-sid" } }.DELETE /v1/my/domains/{domain_id}/subdomains/{id}to stop sharing.
The response identifies the child sending domain. Use the destination brand's credentials for its normal domain and inbox setup. Brand-pinned keys do not receive a directory of other brands. An exact creation retry reuses the same claim. Agents use the same sharing actions, with confirmation before changes.
Route different mail through different subdomains
You can verify more than one subdomain and push different email through each by changing the send-from address:
hello@news.yourdomain.com— marketing campaignshello@txn.yourdomain.com— transactional / product email
Splitting sending this way helps manage mail types separately. Providers may still associate their reputation, so it cannot guarantee that a promotional send will never affect receipts or password resets. This is most useful for large-volume senders; many brands can use a single sending subdomain.
Set a reply-to address
Your send-from address doesn't have to be where replies land. Set a Reply-To under Brand → Sender (app.nitrosend.com/my/brand/sender) and replies go to whatever inbox you like — independent of the subdomain you send from.
For example, send from news@send.yourdomain.com but have replies arrive at
hello@yourdomain.com. The Reply-To can be any mailbox you actually monitor, on
another domain used by your business. Keep sender details accurate and use a
working mailbox your team monitors.
How sending capacity grows
Sending allowance depends on your plan and sender standing: Probation, Standard or Trusted. Standing ranks attributable delivery history, positive current list verification, domain strength and account signals together. Strong evidence can earn a higher standing on day one; payment alone cannot. Trusted receives the full plan allowance immediately, without a second volume ramp. See Pricing for the plan-and-standing allowances.
Each effective sending identity still owns its own delivery and reputation history. History is not copied between domains, and changing sender context does not copy its first-send content clearance. Probation continues to require review of each changed content identity; higher standing does not bypass sender authentication, suppression or safety checks.
The account's fixed plan/standing allowance, provider limits, and delivery pacing are separate inputs to one admission decision. The API, MCP status, and review responses report the binding result; clients should not calculate a private limit from plan names.
